Taizhou Leizhen Mold Co., Ltd. is one of the leading manufacturers and suppliers of 32-cavity cap mold in China. If you're going to buy bulk durable 32-cavity cap mold, welcome to get pricelist from our factory. All customized molds are with high quality and low price.
32-cavity cap mold
The 32-cavity cap mold is engineered for high-efficiency water and beverage production, where throughput per machine determines profitability. It delivers the output of a full-scale production tool while fitting on standard high-speed preform machines, making it one of the most cost-effective configurations for mass-market bottling. Manufacturers running PCO 1881 water preforms at scale consistently choose this cavity count for its balance of speed and reliability.
Every one of the 32 impressions receives identical melt conditions through a precisely balanced multi-level hot runner, holding cavity-to-cavity weight deviation to minimal levels. The mold's cooling architecture is designed for rapid, uniform heat extraction, enabling the short cycle times that maximize machine utilization. Hardened cavity inserts and a rigid steel stack maintain accuracy through continuous high-speed operation.
Beyond water, the 32-cavity cap mold handles cosmetic bottle and specialty beverage preforms with quick-change neck rings that simplify format conversion. Each mold is delivered with a complete process window dossier and remote commissioning support, so your high-speed line reaches its designed throughput quickly. For producers scaling beverage output, this mold represents the production efficiency standard.
Higher cavity counts multiply the benefit of every cycle-time improvement, and this tool's thermal design is matched to that goal. Producers scaling toward national distribution find the configuration a dependable bridge between pilot volumes and full industrial output.
Key Parameters
|
Parameter |
Specification |
|
Cavity Number |
32 |
|
Hot Runner |
Multi-Level Balanced |
|
Cavity Steel |
S136 ESR (HRC 48-52) |
|
Neck Finish |
PCO 1881 / 1810 |
|
Material |
Food Grade PET |
|
Cycle Time |
8-14 Seconds |
|
Mold Life |
3 Million+ Shots |
|
Machine Range |
400-600 Ton |
Application Scenarios
- Mass-market water bottle preforms
- High-speed beverage production
- Cosmetic bottle preform molding
- Export-oriented manufacturing
- Carbonated drink preform lines
Precautions & Maintenance
- Verify multi-level manifold balance quarterly
- Inspect neck rings for wear every 100,000 cycles
- Monitor per-cavity weight with SPC sampling
- Check cooling efficiency with thermal imaging
- Calibrate PID zones against reference probes
Slogan
Thirty-Two Reasons Your Line Runs Faster.
SEO Keywords
32 cavity preform mold, high speed preform mold, water bottle 32 cavity, PCO 1881 preform mold, high output PET mold, mass production preform tooling
Hot Tags: 32-cavity cap mold, China 32-cavity cap mold manufacturers, suppliers, factory, 16 cavity multi purpose bubble tea edible oil preform mold, 16 Cavity Preform Mold, 80mm big neck food container tube blank die, edible oil preform mold, , wide mouth preform mold
